Viva Group MLS50-GL28 Glazed-in Louvre for 28mm Glazing

Viva	75mm Glazed-in Louvres LLS75-GL28 and LLS75-GL-Custom

This Viva Glazed-in Wall Louvre design uses 75mm louvres to cater for glazing panels of varying thicknesses. The most requested Glazing thickness is 28 mm. (LLS75-GL28) However, our design is adaptable to other glazing sizes as per your requirements (LLS75-GL-Custom). Please specify your preferred sizes when ordering

To ensure long life, all parts are manufactured with high grade aluminium extrusions with a wide range of paint colour options also available

More details are given in the Technical Specification below, but if you require further information, please contact us

Technical Specifications

Type

Glazed-in Louvre, flanged with a blade pitch of 75 mm

Adaptable to various glazing sizes as per your requirements

Z-shaped louvres

Material

Aluminium	All parts (frame profile, clips, blades, etc) are manufactured from aluminium extrusions Al Mg Si 0,5
Profile thickness	Minimum 1.5 mm
Finish	Natural anodising to 15-22μm with Powder coating available in any RAL colour
Protection	Nylon Insect mesh fitted as standard with Stainless steel or Gas meshes also available

Design

The glazed in louvre consists of a flanged frame profile
The aluminium louvre clips are fitted into the frame profile and the aluminium louvre blades are clipped into the louvre clips
Blade pitch	75 mm
Blade height	107 mm
Glazing Thickness	28mm (Typical, or as per your requirements)
Visual free area	77%
1.5mm aluminium panels can also be fitted instead of insect meshes
Aluminium foil covered insulation packs in any thickness required can be bonded to the back of panels
Reinforcement profile carrying extra blade supports fitted for louvre widths > 700mm
Aluminium water drainage profile can be fitted at the bottom of the louvre to improve water tightness